中文简体 | English

Products

  • Pharma Machine
  • Metal Detector
  • Check Weigher
  • Filling Machine
  • Sealing Machine
  • Packaging Machine
  • Garment Machines
  • Electronic Products

Drum Filler

Four Drums Filling Machine

It is  used for filling four drums on the same pallet

    FILLING MACHINE FOR DRUMS ON PALLET

    Model No.: ADF-1200L4

    Filling Material: lubricating oil/Resin/ Engine oil

    Filling Weight: 200kg/Drum

    Filling Capacity: 200L Round Barrel (Four Drums on the same pallet)

    Filling Accuracy: ±0.1% F.S. (Accuracy depends on suitable adjustment of slow feeding and the stability and consecutiveness of liquid to spray gun

    Filling Speed: 40-60Barrels/hour (Depend on previous speed of feeding material, the previous speed of liquid must be 300L/MIN.)

    Measure Method: Two-section Feed Control, Filling into drum on above liquid level

    Drum Size: Iron Drum, Small Open Mouth

    Material Connector: DN40 Rapid Flange Connector (Pressure of liquid feeding should less than 0.6MPa)


    EQUIPMENT DESCRIPTION

    Electric Weighing Scale with Roller Conveyor

    Weighing Range: 1200kg x200g

    Weighing Table Size: 1500mm X1500mm

    LOVOSC LP7110 Load Cell for pieces

    JB-05 Load Cell junction box

    Painted Steel Platform

    Roller Conveyor with no motor driven

    Weighing Area Size:1500mm(L)x1500mm(W)

    Material of Machine Body: Painted Steel

    Material of Rollers: Galvanized steel pipe

    Size: Φ80mm x150mm Pitch

    Conveyor has detent mechanism and switch for moving/ Stop control


    Automatic Liquid Filling Machine

    Φ1 1/2” FB type Two Stages pneumatic Filling Spray Gun (Material of Spray Gun is SUS 304, Sealing Material: polyvinyl fluoride), Attached Φ1 1/2” rapid connector for feeding material, which used for change material, fast disassemble.

    Three-section infeed control, there is a foot valve at head of filling gun to improve filling accuracy and avoid rest of liquid overflow

    Gas-collection hood used to collect flue gas, stainless steel 304 material

    Offer anti-leak cup, stainless steel 304 material

    Manual adjust spray gun height

    Equipped with automatic promotion and demotion cylinders

    Equipped with base of filling spray gun (Material: Painted stainless steel)

    Included Anti-explosion pneumatic parts (pneumatic parts brand is AIRTAC)


    Automatic Controller

    Wall-hung type Control Box

    ST510 Weighing Controller

    MCGSTPC TPC7062Ti Operation Interface

    FATEK FBS PLC programming control (Including RS232 modular)

    Two-section liquid infeed weight control (fast-slow)

    10 Product Preset, easy to edit

    Automatic Stop and Alarm when no liquid


    Roller Conveyor for empty barrels and finished barrels storing

    Roller Conveyor with motor driven

    Roller Size: 1500mm(L)x1500mm(W)

    0.75KW gear reduction motor

    Material of Machine Body: Painted Steel

    Roller Material: Galvanized steel pipe

    Size: Φ80mm x150mm Pitch

    2  Machine design is based on easy assemble and disassemble, convenient for changing rollers

    On weighing conveyor, installed pneumatic brake to avoid barrel move when fill in liquid to barrels

    Installation Mode: On Ground


     OTHER REQUIREMENT

    Buyer should install the machines by themselves and seller can give them guide; quotation doesn't include installation costs.

    Buyer should prepare soft pipe and flange to connect with our machines to infeed liquid; Buyer should prepare pump to supply liquid to our machine and it should has reflux device; buyer should prepare separate power source AC380V, 3Phase/AC220V;1Phase; 50Hz; 20A and 4-6kgf/cm2 compressed air.

Related